[Sly]

Autodesk 2012 Product KG 32/64bit

Keygen made by X-FORCE

Link(s):

Red - not working



X-Force KG only link


Hashes for X-Forece keygen

xf-adesk2012x32.exe:
CRC32: BC1513CC
MD5: 055F2FFE6126A0D458E64F5333D524CC
SHA-1: 31E2F1A6726FDE67AC0A641C000AF2E2C826971F

xf-adesk2012x64.exe:
CRC32: CDF56B2C
MD5: 2AD744237A1D5CA25B671862CB9961B9
SHA-1: 082354A70A7643A94E76C581E144B38FBFBBF851


Instructions

1.Install Autodesk (inserd name here) 2012
2.Use as Serial 666-69696969, 667-98989898, 400-45454545 .. or anything matching those templates
3.For Product Key use one from list above
4.Finish the installation & restart Autodesk Product
5.Before clicking on Activate
You have 2 options :
- a) Disable Your network Card, pull the network cable out or block with firewall
(this is just to disable online serial check)
OR
- b) Click on Activate and it will tell you that your serial is wrong, simply click
on close et click on activate again.
Choose option a or b.
6. Select I have an activation code from Autodesk

7.Once at the activation screen:
start XFORCE Keygen 32bits version if you are installing a 32bits application and
64bits if you are installing a 64bits application.
8.Click on Mem Patch (you should see successfully patched)
9.Copy the request code into the keygen and press generate
10.Now copy the activation code back to the activation screen and click Next
You have a fully registered autodesk product

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

FAQ
Q: Activation white Screen

Link(s):

A: Do steps from here

Link(s):

[Sly]

Note: Torrent links are added if i happen to find any, if there is no torrent link here that means i did not found torrent, if program is in green/blue/magenta in list in 1st post just use forum search, someone most likely already posted a release, if not use google
Note2: External torrent lifespan not guaranteed. If someone wants to fix it's share ratio feel free to upload on cgpeers what is not there already

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

Link(s):

If someone wants to keep those torrents alive do not hit and run

[LooseNeutral]

Keeps getting better all the time !

[spicypixel]

Waiting for max2012 is painful.

[Ir0nboy]

AWESOME!

[Nirrol]

Using it will be more painful

[Cadmium77]

Link(s):

[Sly]

More images added

Link(s):

You worry to much. Program UI is same

[berdinatilli]

Link(s):

i also think you guys worry to much...

want to have an idea what is really painfull in a newer version ?

google for images: 3d studio r4

now imagine, migrate from it to max

[Kenshiro]

Great! Hope to see Max2012 next ^^

[Sly]

Last year max (retail) was 1st week of april

for max triall is not full (for instance triall 2011 was x86 only, textures missing, composite missing)

[bobman]

can u write the pass please i can't unrar the file

[phearak]

If like you are saying what I can do just coundown ---1st week of april ! Ok see you again and Thank your, Sly!!!
NOT only Max but SI 2

[rab236]

anybody think Maya 2012 is going to be called "Apocalypse" just for one year?

[weiq]

Link(s):

name taken :

Link(s):

[cyph1]

Before most of the Autodesk apps are uploaded in the next few weeks I need a small clarification.

3.Use as Product Key from list

What are these product keys? The ones above the Instuction of the original post?

Thank you for your help.


Cheers

[EAHP74]

Paswword please............

[rasamaya]

The password works fine.

[Josey Wales]

Googled all over and can't find "Autodesk Inventor" just "Inventor Lt", I would even settle for 2011 Inventor Pro at this point. Anyone got a link? Thanks A Million!!!

PS Thanks XFORCE for your dedication

[muchograndes]

yeah i was like O_o havnt heard of any releases yet, and KG already out... nice... talk about being 1 step ahead..

[HOU DINI]

Josey W.

Try this:

Link(s):

Scroll down, the rapidshare link posted by Eugene is still good. or Download from Autodesk and use Xforce 2011 keygen.

[Sly]

Link(s):

Take a look at 1st screen, there is a serial number field and product key field. For serial (this goes for most if not all programs) use serial from point 2 (666...), For product key (varies depending on what you are installing) use one from the list of 5 digit product key's at top of post. Procedure is same as for 2011 and below. If you installed any one of those programs it should be like walk in the park

[Josey Wales]

Link(s):

I looked on Autodesk but you can only download the "Lt" version the Full blown one they want to mail to you
I tried downloading those links some there some not but I just seen a new one listed. Hoping for a torrent or direct. Thanks for your help.

[grindkorr]

hmmm and what about mudbox 2012 ?

[Sly]

Link(s):

If you want 2011 you can try this

Link(s):

But 2012 should be out before april (at least last year it was out before april)

Link(s):

Not out yeat (same goes for other programs NO NEED to post is it out yeat for every single program) The green coloring in product key's serve a funcion of listing what programs are out (for now those 3 and cad mep as said many times already)

Edit: change colorings a little

Green out and tested
Blue out not tested

[dhonzie]

sly, can you invite me to demonoid? plsss?
THNKS n advance.............

[Sly]

Here's the .t file

Link(s):

no pass

[chauchau]

The Download page is ready with all Package icons and video demo :

Link(s):

But only 2011 files for now XD

[pstef]

Enormous Thanks at XFORCE ! ! !

[smootherup]

pass KG please!!!

[dreambox2011]

Why do you have to set a password ? XFORCE didnt password protect their releases , so you have no reason or "right" to do that on their release.
Next step will be to pay for the password ? Ridiculous

[dreambox2011]

Link(s):

The code name for Maya is Colombo
and Rampage for Max

[Sly]

Link(s):

1. X-force DID NOT released kg only. Neither when i nade that post nor when you complained
2. For me YOU can download whole product package (varies between 2-16gb)
3. password is posted right under link for kg. If someone does not "get it" then they can download whole program to get kg, but they will download whole program eventually when it will be released
4. Pass is for uploading sites to prevent them from viewing files/deleting and for people to tend to copy/paste links to other sites (esanti's site/other), but W** your problem with 500kb download?
5. If you want that much i can ask xforce weather or not they mind me posting kg only in pass, but most likely if i did not changed anything in files (valid .exe) and POSTED PASS and mention them i bet they do not mind

[joerombie22]

Can't wait for Max 2012 to get here thanks for the release

[rab236]

Link(s):

Design software companies need to get a sense of humor... like the music hardware companies. Now THEY have a sense of humor (Behringer, Moog, etc.).

[Pinguin]

ouu the wait!!!!

[abccad]

Link(s):

2012 Inventor publisher is out, but not Inventor Pro.

It is coming though.

[koenrad]

Thanks so much! You are my hero :-*.

[13.logic]

need confirmation bout the performance. 2009-2010 is an exelent performance. 2011 for me is a bad performance in graphic speed. how about this one (2012). is it good? sorry for my bad english. thanks for the post.

[oudou]

Link(s):

Max 2011 was far better than 2010 on my computers with hardware shading on (but AO/shadows off). 2012 "should" be better.

[Pedja]

Password, for archive, please !

[chaos1986]

anyone know where i can find max 2012?

[Osmosis]

Link(s):

It resides behind your patience

[Sly]

Link(s):

Not out. When it will be out it will show up on forum

So wait, unless you have time machine, then jump and bring back max/other 2012+

[g278124]

thanks everybody for all!!!

[Oyama]

What's the pass?

Thanks

Edit: I foundt it.

Don't know why don't write the pass

[kalauddin]

Hi everybody i have tryed but its not working once I pree Mem patch it give me error

Link(s):

, and after i paste the prodcut code and generate the activiate code the number not compete!!!!!

[kalauddin]

the activiation code should be 64 charcter i get only 57!!!!

[Sly]

Question is already answered in one of screens at top

As for your pic, your link is invalid. Who is putting a link to C:\... ...

[viperia]

Link(s):

Where is the pass??? I dont find that anywhere... can you give the pass?
It's marked that it is sitename.com but thats not the real pass...

Why?