CGPersia Forums

CGPersia Forums (http://forum.cgpersia.com/)
-   Full Applications - Releases (http://forum.cgpersia.com/full-applications-releases/)
-   -   SIEMENS PLM NX Version: 8.0.0.25 32bit & 64bit (http://forum.cgpersia.com/f13/siemens-plm-nx-version-8-0-0-25-32bit-64bit-39065/)

Ichio 09-12-2011 08:45 PM

SIEMENS PLM NX Version: 8.0.0.25 32bit & 64bit
 
SIEMENS PLM NX Version: 8.0.0.25 32bit & 64bit
Version: 8.0.0.25 32bit & 64bit with Documentation
Creator:
Code:

www.plm.automation.siemens.com
Interface: multilanguage
OS: Windows XP / Vista / Seven
Size: 3.1 Gb & 3.4 Gb
Special Thanks SSQ

Download torrent from here:
hxxp://www.demonoid.me/files/details/2727610/00556883896/
or :
Code:

http://www.mediafire.com/?5atsaidp3q3j5ta
pass : cgp

p.s.: NOT YET TESTED !

bukko 09-13-2011 07:31 AM

Installed and working perfectly so far on W7 64bit..... Thanks!

Run For Cover 09-15-2011 07:21 AM

Thanks man.

I'm still using 7.5, but re-installing both my boxes right now. Will check it out in a couple of days.

mongodrom 10-07-2011 03:15 PM

Please, I still have the same problem with nx8, that I already had with nx7.5.
Can please somebody explain how they installed it!
I'm not able to force the server to shut down.
I'm on windows7 64bit.
Thanks

bukko 10-08-2011 06:09 AM

Quote:

Originally Posted by mongodrom (Post 344288)
Please, I still have the same problem with nx8, that I already had with nx7.5.
Can please somebody explain how they installed it!
I'm not able to force the server to shut down.
I'm on windows7 64bit.
Thanks


I noticed that during my install as well but ignored the fact that it "appeared" not to shut down and went ahead with the install per the nfo....

It works perfectly at this time.

Best wishes to you.

Bukko.

mongodrom 10-08-2011 10:39 AM

That's what I did as well. But when I try to start NX after the installation it gives me an error. Something like "no valid license found". But thanks anyway.

adensymonds 10-12-2011 06:09 PM

Can someone please tell me what to put in the license server box when I try and install NX?

Cadmium77 11-17-2011 04:08 AM

Code:

http://www.youtube.com/watch?v=9U9jB_Wq3UM
Anyone..the installation wizard installed nx 8 to the Programs file (that is 64 bit programs) but it wants to install the USGlicensing to the Programs(x86) file

Is that going to work out or should I do what the instructions for the crack says and install the USGLicensing to the Programs file (64 bit)?

I went ahead and installed the USGLicensing to the Programs(x32) with the actual NX8 installation in Programs and ti all worked out perfectly the first time.

A great crack of a great program.

installing documentation right now..

Cadmium77 11-17-2011 05:19 AM

Quote:

Originally Posted by carolsterrettsterrett (Post 368336)
Great work ! I will keep following this thread!!
[image][image]


Who cares about Catia v5 or v6??

NX 8 FUCKING RULES YAAY


Code:

http://www.youtube.com/watch?v=Lho6l_QQQ38&feature=related
:D:D

antwane 12-27-2011 02:21 PM

Hi,

I tried to install NX7,5 and now NX8 but I have always an error message, when I launch NX8.
I followed the steps of readme.txt (in crack folder).

If the first time the installation has failed, Do I need to completely install ? Or just launch LMTOOLS and re-try ?

Thx

Ichio 12-27-2011 05:25 PM

Quote:

Originally Posted by antwane (Post 390362)
Hi,

I tried to install NX7,5 and now NX8 but I have always an error message, when I launch NX8.
I followed the steps of readme.txt (in crack folder).

If the first time the installation has failed, Do I need to completely install ? Or just launch LMTOOLS and re-try ?

Thx

How can you expect some help, if you do not even give us the exact error message + some more info about your system specs ?

antwane 12-27-2011 09:06 PM

When I launch NX8, I have this message (see link)
Code:

http://img15.hostingpics.net/pics/755269Sanstitre2.jpg
My installation (64bit):
1- Install license server : in Program files (x86)\...
2- I selected NX8.lic (in Crack folder\UGSLicensing)
3- After I installed NX
4- "Typical installation" (Full install) in Program Files\Siemens\NX8
5- My hostname "28000@antwane"
6- I followed instruction in readme.txt

Quote:

3) Copy folders "DRAFTINGPLUS, NXCAE_EXTRAS, NXNASTRAN, NXPLOT and UGII" from crack to <NX8.0 progdir> (by default C:\Program Files\Siemens\NX 8.0\) and overwrite original ones
4) Go to <UGSLicensing progdir> (by default: C:\Program Files\UGS\UGSLicensing\) and run lmtools.exe
5) Select "Configuration using Services"
6) Select "UGS License Server (ugslmd)" in the list of servers
7) Select "Start/Stop/Reread" tab
8) Select "Force Server Shutdown"
9) Press "Stop Server"
10) Replace <UGSLicensing progdir>\ugslmd.exe with one from folder ..\UGSLicensing
11) Press "Start Server"
After, I don't close windows, and I try to launch NX8, but I have this famous error message
Code:

http://img15.hostingpics.net/pics/755269Sanstitre2.jpg
Thx for your help

Ichio 12-27-2011 09:23 PM

What I suggest:
De-install / remove everything nx related by also using ccleaner+jv16 powertools and possibly revo-uninstaller (remove junke-files) in order to prepare a clean install.
Turn off UAC, de-activate any av-prog.
1. Install the programm
2. Install the license server + when asked, point to the crk-license-file + proceed according to the medical instruction.
3. Restart + enjoy !

Just my 2 cts

You may also check the system variables:
UGII_BASE_DIR
UGII_Lang
UGII_Root_DIR
UGS_LICENSE_SERVER

if they are present and properly installed ?

notx888 12-28-2011 01:56 PM

Siemens NX 8.0 Documentation Multilanguage 32bit & 64bit
 
http://i.lulzimg.com/be1348aba5.jpg
Siemens NX 8.0 Documentation Multilanguage 32bit & 64bit | 13.9 Gb
Languages: German, French, Italian, Spanish, English

Bringing High Definition PLM to product development, Siemens PLM NX redefines productivity with a powerful suite of integrated CAD, CAE and CAM solutions. Siemens PLM NX takes full advantage of the High Definition PLM Technology Framework to improve decision making throughout the product development process.

About Siemens AG

Siemens AG is a German engineering conglomerate, the largest of its kind in Europe. Siemens has international headquarters located in Berlin, Munich and Erlangen. The company has three main business sectors: Industry, Energy, and Healthcare; with a total of 15 divisions. Worldwide, Siemens and its subsidiaries employ approximately 420,800 people in nearly 190 countries and reported global revenue of 76.651 billion euros for the year of 2009. Siemens AG is listed on the Frankfurt Stock Exchange, and has been listed on the New York Stock Exchange since March 12, 2001.

About SIEMENS PLM NX

NX is a next-generation digital product development system that helps companies transform the product lifecycle. With the industry's broadest suite of integrated, fully associative CAD/CAM/CAE applications, NX touches the full range of development processes in product design, manufacturing and simulation.

NX provides a complete suite of integrated process automation tools to enable companies to capture and reuse product and process knowledge encouraging the use of corporate best practice.

About Siemens NX 8.0 Documentation

The NX online Help is delivered in XML and HTML format. A few modules are delivered in PDF format. On Windows the Open for .NET and SNAP Reference Guides are delivered in compiled help .chm format.

You can view NX Help using a web browser. The web browser must support Java (MS JVM or Sun JVM version 1.5 or higher. The JVM is available in the Java Runtime Environment (JRE) 6.0.) for the search to work.

Name: Siemens NX 8.0
Version: Documentation 32bit & 64bit
Creator:
Code:

www.plm.automation.siemens.com
Interface: English, German, French, Italian, Spanish
OS: Windows XP / Vista / Seven

Download Links:
Code:

http://www.filesonic.com/file/cm9RGLD/snx80.part01.rar
http://www.filesonic.com/file/syhq0zO/snx80.part02.rar
http://www.filesonic.com/file/EB6hueF/snx80.part03.rar
http://www.filesonic.com/file/zQvMSLc/snx80.part04.rar
http://www.filesonic.com/file/zQvMmvA/snx80.part05.rar
http://www.filesonic.com/file/nhAfaEI/snx80.part06.rar
http://www.filesonic.com/file/RvTU9ta/snx80.part07.rar
http://www.filesonic.com/file/oQAXBfl/snx80.part08.rar
http://www.filesonic.com/file/KkmTzh6/snx80.part09.rar
http://www.filesonic.com/file/DXf05wK/snx80.part10.rar
http://www.filesonic.com/file/kkhLme1/snx80.part11.rar
http://www.filesonic.com/file/IDjOKPd/snx80.part12.rar
http://www.filesonic.com/file/NrjSV0C/snx80.part13.rar
http://www.filesonic.com/file/yLkea8a/snx80.part14.rar

http://ul.to/ldrfqpy7/snx80.part14.rar
http://ul.to/7kr2ixlb/snx80.part13.rar
http://ul.to/b2fsvdt0/snx80.part12.rar
http://ul.to/pfb00xze/snx80.part11.rar
http://ul.to/dplsdhvs/snx80.part10.rar
http://ul.to/0jbow1aj/snx80.part09.rar
http://ul.to/sg7nonwj/snx80.part08.rar
http://ul.to/c7sed5mu/snx80.part07.rar
http://ul.to/q6ao0o19/snx80.part06.rar
http://ul.to/0yb8lbzq/snx80.part05.rar
http://ul.to/7t20dig3/snx80.part04.rar
http://ul.to/tom4pq2p/snx80.part03.rar
http://ul.to/sdkg3z4y/snx80.part02.rar
http://ul.to/ztjausb9/snx80.part01.rar


antwane 12-28-2011 03:21 PM

Quote:

Originally Posted by Ichio (Post 390516)
What I suggest:
De-install / remove everything nx related by also using ccleaner+jv16 powertools and possibly revo-uninstaller (remove junke-files) in order to prepare a clean install.
Turn off UAC, de-activate any av-prog.
1. Install the programm
2. Install the license server + when asked, point to the crk-license-file + proceed according to the medical instruction.
3. Restart + enjoy !

Just my 2 cts

You may also check the system variables:
UGII_BASE_DIR
UGII_Lang
UGII_Root_DIR
UGS_LICENSE_SERVER

if they are present and properly installed ?

Thank you very much !

I uninstalled with CCleaner (NX+License Server), and I deleted 4 "input registry" concerning NX7.5 with jv16 + remove junk files(in \UGSLicensing + remove folder UGSLicensing)

I rebooted, after I turned off UAC + desactivate Eset Smart Security 5
1- Install NX
2- Install License server + point to the crack license file
3- Restart and I try to launch NX8, I didn't error message but the picture "NX8disappears after a few seconds (program not launched)
4- Retry to launch NX8 "as Admin" and NX8 works !

Thx Ichio !

dreyfusduke 01-31-2012 04:03 AM

Im new to all of this but really need this program. I believe I can follow the directions but I have some simple, yet newbie, style questions.

First, what are the actual system requirements for the software. I do not see them on the Siemens site.

CPU?
How many Cores?
Video Card? Size?
RAM size?


Next question is about the file links. Why so many? Don't ya just get it from 1 bit torrent file or what?

Cadmium77 01-31-2012 06:05 AM

Quote:

Originally Posted by dreyfusduke (Post 410366)
Im new to all of this but really need this program. I believe I can follow the directions but I have some simple, yet newbie, style questions.

First, what are the actual system requirements for the software. I do not see them on the Siemens site.

CPU?
How many Cores?
Video Card? Size?
RAM size?


Next question is about the file links. Why so many? Don't ya just get it from 1 bit torrent file or what?



This board is mainly devoted to file sharing cloud sites like Rapidshare etc. Torrents are on this board;

Code:

http://cgpeers.com/torrents.php

dreyfusduke 02-17-2012 12:49 AM

Thanks, Cadmium77. I use this program at my workplace from time to time and love it (NX 7.5).
I am currently going to build at computer for just this program so I can hook to my TV via HDMI and practice at home (and draw motorcycle parts )
-If this is truely just a 32bit crack, then 4GB max ram is all that can be used, correct?
-Do I really need at Nvidea Quadro video card to run this properly, or can I drop back to a cheaper (much) Geforce GTX?
I really want to get this running ASAP. Any help will be greatly appreciated. Thanks.

iyor 02-26-2012 07:42 AM

What about the Mac version?

Run For Cover 04-17-2012 08:25 PM

Check your firewall (logs) maybe ?.

Run For Cover 04-18-2012 07:48 AM

Quote:

Originally Posted by w00ters (Post 461691)
Mate...you are a GENIUS!

Turns out ZoneAlarm was the culprit. I simply disabled it, since I don't really use my design PC for any internet browsing.

And it works now! WOOP WOOP!

Now...if only I could find some NX tuts :(...

Maybe it is better to just open up the necessary ports. It's up to you though. ;)
About NX 8 Tuts : Insert this into Big G's slit :
Code:

"Siemens PLM NX 8.0 CAST Online Library (x86/x64) Updated 2012"
Maybe it is also here, on CGPersia or CGPeers. Good luck.

Ichio 04-18-2012 08:53 AM

the nx8 online lib - cast- may be still here, the 64-bit version:
Code:

http://filepost.com/folder/96mm3afd/

Ichio 04-18-2012 10:26 AM

Quote:

Originally Posted by w00ters (Post 461812)
You people are LEGENDARY!

Quick question: do any of you think that learning Solid Edge would be a bit pointless if you're already well-versed in SolidWorks and NX (and maybe even CATIA V5)? I mean, is Solid Edge more like a 'lite' version of NX, but with a parasolid kernel?

Some impressions:
1. SW is heading towards the "cloud-strategy"
2. SE may be regarded as the NX-light-version
3. NX , well the heavy-weight-champ with vast surfacing capabilities

Just my 2cts

gbama 04-29-2012 10:57 AM

Your torrent link helped a lot

epoxid 05-01-2012 02:26 PM

Hi guys, I have a error massage http://imageshack.us/photo/my-images...xerrormes.jpg/
How can I fix this?
the port its open but the UGS service its shuting down after3 seconds I start
http://imageshack.us/photo/my-images/198/ugslmd.jpg/

Im runing a win 7 64bit home premium over a Pavilion G6 Laptop

Run For Cover 05-01-2012 04:03 PM

Start the NX License Server manually from the Windows Services list.
Start >> right-click Computer >> Manage >> Services and Applications >> Services.
Or Start >> Type services.msc in the search box >> Hit ENTER

EDIT1:
Or go to this page
Code:

http://cadhelpcenter.blogspot.com/2012/01/step-by-step-installation-process-of-ug.html
and pick up from "If there is a problem in start up or any error line License Server Down or License Server not Started or License file in configured at wrong port etc".

Run For Cover 05-13-2012 03:17 PM

No problems here.
Depending on your monitor setup. Your notebook + external monitor maybe? You could try : Open up Windows Task Manager, select the Processes-tab, click the "Show processes from all users" button, and click the CPU-column heading once to sort it descending. Leave it open and go for it with NX. When the freeze happens again, immediately watch which program/process shoots to the top. And how much CPU it uses.

Run For Cover 05-13-2012 04:18 PM

I didn't mean that there might be a problem with your monitor setup. But that the open Task Manager window would probably take up too much space to work comfortably in NX. So with a multi-monitor setup you could move the Task manager window to a monitor where it would hinder you less. The only way to find out, is to actually see which process is freezing your box. With Task manager or another tool.

P.S. With me it usually is NOD32 randomly deciding to go on a quest to fight windmills. Or after a .NET update, when lots of stuff needs to be recompiled. The .NET compiler sometimes peeks.

Run For Cover 05-13-2012 04:27 PM

No problem. Hope it turns out not to be NX. Wonderful proggy.
And enjoy the TV. Don't break it. ;)

mcwilli 06-17-2012 12:41 AM

how on mac? server will not work on lion.

mcwilli 06-25-2012 06:28 PM

push

Run For Cover 06-26-2012 01:55 AM

Quote:

Originally Posted by mcwilli (Post 498384)
how on mac? server will not work on lion.

Quote:

Originally Posted by mcwilli (Post 502899)
push

Your in the wrong forum. This is like walking into a M(a)cDonalds' competitor franchise and asking for a Big Mac.
(I know that McDonalds owns Burger King. But I couldn't quickly find another pic. You'll get the idea.)


WallsReid 06-26-2012 09:15 AM

I tried to install NX7,5 and now NX8 but I have always an error message

Ichio 06-26-2012 09:29 AM

Your information is absolutely useless, do you know why ???

mcwilli 06-30-2012 05:58 PM

so what?

Run For Cover 06-30-2012 06:36 PM

Quote:

Originally Posted by mcwilli (Post 506011)
so what?

Here's what : Go fill up another thread with stupidity.

amIfromUS 07-22-2012 07:22 PM

hello guys, all the links seem to be down, & I could not find Siemens, nor nx in cgpeers any chance of reposting the links?, and perhaps its tutorials?

Ichio 07-22-2012 08:23 PM

Quote:

Originally Posted by amIfromUS (Post 519536)
hello guys, all the links seem to be down, & I could not find Siemens, nor nx in cgpeers any chance of reposting the links?, and perhaps its tutorials?

go to demonoid, it's there !
+
isohunt

eggert 09-11-2012 09:42 PM

any chance to get it again? i am new to this... did i miss something?!

Ichio 09-11-2012 09:49 PM

Quote:

Originally Posted by eggert (Post 554316)
any chance to get it again? i am new to this... did i miss something?!

try this link:
hxxp://isohunt.com/torrent_details/374249941/siemens?tab=summary

biejste 12-03-2012 02:48 PM

hellow guys
i instald nx 8 and tryed som tings whit the lmtool but i keep getting the same error massages 1 vendor daemon is down [-97] 2 somting about the host [-15] i have tryed to instal it 3 times but keep getting the same.
i'm new to al this so hope for a good explanaition

tanks

Ichio 12-03-2012 02:54 PM

Quote:

Originally Posted by biejste (Post 605527)
hellow guys
i instald nx 8 and tryed som tings whit the lmtool but i keep getting the same error massages 1 vendor daemon is down [-97] 2 somting about the host [-15] i have tryed to instal it 3 times but keep getting the same.
i'm new to al this so hope for a good explanaition

tanks

Read very carefully the relevant threads about version 7 and 8 ! It's all explained !!!
Good luck :)

alosepuluh 12-10-2012 05:31 AM

i installing nx 8 (win7 x64) when finish i have massage like this
Code:

http://s1156.beta.photobucket.com/user/alosepuluh/media/Capture-1.jpg.html
and
Code:

http://s1156.beta.photobucket.com/user/alosepuluh/media/Capture2.jpg.html
i try to reinstall (turn off uac and av) follow instruktion from crack and result same (error)
maybe the problem in my win not the crack?
anyone can help me..
thank.

Run For Cover 12-10-2012 08:10 PM

Have you read and tried what's written in posts #20, #21, and #26?
w00ters posts have been removed, but if I remember correctly, he had the same message (as in your first screenshot).

alosepuluh 12-11-2012 02:11 AM

Quote:

Originally Posted by Run For Cover (Post 610771)
Have you read and tried what's written in posts #20, #21, and #26?
w00ters posts have been removed, but if I remember correctly, he had the same message (as in your first screenshot).

yes, i have read all post and try all trick...i think my win must be reinstall.

Run For Cover 12-11-2012 02:17 AM

Quote:

Originally Posted by alosepuluh (Post 610957)
yes, i have read all post and try all trick...i think my win must be reinstall.

If you say so.

kimjongho 12-13-2012 02:22 AM

NX8.5 Crack Download Pless~~~~

Cadmium77 12-13-2012 02:58 AM

Code:

http://www.youtube.com/user/netwulf61/videos

cucurlabukuning 12-28-2012 12:50 PM

i can't read the link..... please help me..

nanc442 01-03-2013 11:36 PM

This worked for me. Win7 x64
 
Deactivate any security programs before install
1) Install NX in c:\Program Files (NOT program files\x86)
2) Install Licensce Server in c:\Program Files(x86)... (yes... (x86))
3) Copy folders "DRAFTINGPLUS, NXCAE_EXTRAS, NXNASTRAN, NXPLOT and UGII" from crack to
(by default C:\Program Files\Siemens\NX 8.0\) and overwrite original ones
4) Go to (by default: C:\Program Files(x86)\UGS\UGSLicensing\) and run lmtools.exe AS ADMINISTRATOR
5) Select "Configuration using Services"
6) Select "UGS License Server (ugslmd)" in the list of servers
7) Select "Start/Stop/Reread" tab
8) Select "Force Server Shutdown"
9) Press "Stop Server"
10) Replace \ugslmd.exe with one from folder ..C:\Program Files\Siemens\NX 8.0\UGSLicensing
11) Press "Start Server"
12) Click start menu and right click computer, select properties>advanced system settings>environment
variables.
13) Scroll down and find UGS_LICENSE_SERVER, select it and click edit, (if it's not there,
just click new and create it.
14) in the varaiable name place UGS_LICENSE_SERVER and in the value,
place the location of your ugs4.lic file which should be
C:\Program Files(x86)\UGS\NX8.0\UGFLEXLM\ugs4.lic
15) Do the same thing for UGS_LICENSE_FILE and click ok all the way out.
16) Unplug from internet
17) Run 8.0 AS ADMINSTRATOR... start and save a file... close NX... plug back into internet..
reactivate security programs
18) Good to go. :cool:


All times are GMT +1. The time now is 04:13 AM.

Powered by PHPbb