CGPersia Forums

CGPersia Forums (http://forum.cgpersia.com/)
-   Off-Topic Discussion (http://forum.cgpersia.com/off-topic-discussion/)
-   -   Autodesk 2013 xforce keygen for Windows 8 ? (http://forum.cgpersia.com/f27/autodesk-2013-xforce-keygen-windows-8-a-58401/)

th4d 08-21-2012 01:59 PM

Autodesk 2013 xforce keygen for Windows 8 ?
 
They worked fine in windows 7, but now they not only wont open, they freeze windows 8 unless i end the process (both, since it opens two of them without showing nothing on the desktop) quickly.

UAC off, Administrator, DEP off, windows defender off, no antivirus, network off, verified in on different writable folders and tried also compatibility mode for xp and w7. also, the win8 is original and activated (not sure if that changes anything)

Will there be a new one that works?


Thanks!

dgtheone 08-21-2012 02:20 PM

Though about upgrading to Win8 but then remembered my number one OS upgrade rule. Wait for the first service pack.

th4d 08-22-2012 02:31 AM

i believe it has something to do with how windows 8 handles applications now. must be blocking write access or something.

damn cgpersia used to be fast and error free, its giving me bad gateway all the time now.



---------- Post added 08-22-2012 at 01:31 AM ---------- Previous post was 08-21-2012 at 04:35 PM ----------



no ideas then? guess most still arent using win8 to try stuff.

at least the forum is faster and doesnt give me bad gateway anymore.

Pearly 08-22-2012 02:45 AM

I installed Autodesk Maya right now, it's work perfectly , no problem with genious Windows 8 x64

th4d 08-22-2012 03:36 AM

Quote:

Originally Posted by Pearly (Post 539330)
I installed Autodesk Maya right now, it's work perfectly , no problem with genious Windows 8 x64

thats very interesting, was it 2013? did u install something different prior? like an .net framework or something? did you take any steps other than disabling uac?

i just downloaded the keygen from 3 other packs and to me its the same, process starts to run but it doesnt open and the computer starts to slow down.

th4d 08-23-2012 04:35 AM

beein toying around, every one till 2012 works fine, its only 2013 that doesnt work (wont open).

wahur666 08-27-2012 10:35 AM

try to run the keygen in compatibility mode, it's worked for me with 3ds max 2013

th4d 08-29-2012 12:37 AM

unfortunatly i tried that, disabling uac, etc.

this is what happens:

http://i.imgur.com/G9dA6.jpg

it shows those 2 processes but no window appears, and the pc starts to slow down to a halt unless i shuit those processes down, wierdly while they show that they arent using any cpu cycles, my main hd (which is an ssd) stays at 100%. tried downloading from different packages/sources, same thing.

Shaitan 09-17-2012 01:15 PM

Any news?
I tried to disable UAC, DEP and SmartScreen but the same things happens... :(

aloeh 10-17-2012 10:36 PM

Up.

I have same problem.

Windows 8 pro here.

torero 10-17-2012 11:11 PM

Weird! I was able to install Maya, 3ds Max, Mudbox, Softimage both 2012 and 2013 on my machine under windows 8 with no problems whatsoever. I don't think it has got anything to do with Win8, xforce keygen that is. Did you try performing a clean install of windows?

killerbang 10-18-2012 03:10 AM

Anything new on how windows 8 handles viewport rendering etc is it snappier, slower etc? Just remembering something from the early beta days. It could have been bad drivers from Ati though.

Anyone feel Windows 8 affects their workflow and so on?

I am really torn about Windows 8, thinking it could wherry well be me that has to put in some more time to learn get around in it. As of now i feel like i love and hate it lol

aloeh 10-18-2012 05:28 AM

Quote:

Originally Posted by torero (Post 578591)
Weird! I was able to install Maya, 3ds Max, Mudbox, Softimage both 2012 and 2013 on my machine under windows 8 with no problems whatsoever. I don't think it has got anything to do with Win8, xforce keygen that is. Did you try performing a clean install of windows?

After installing windows 8 pro I ran the keygen and had the same problem.

Past month I had installed win 8 enterprise and had no problem with keygen.

As I have activation for win 8 pro, I have to keep it.


Sry for my bad english.

ochumo 10-22-2012 03:20 PM

same problem... is there any solution?

highroller423 10-22-2012 07:50 PM

Xforce not working
 
I was wondering of anyone could help me. I have Xforce for 3Ds Max 2013 but I keep getting the error "You need to apply patch when licence screen appears." I've done everything I could to fix the problem, still does the same thing. I've looked all over the internet for a solution and none has a straight answer for the problem.

th4d 10-26-2012 06:41 AM

ive tried on a second machine with a newly installed windows 8 and the same thing happens, xforce keygen slowsdowns windows to a halt (through hard disk usage).

is there a new version for windows 8? is there any interest on this?

for now i gave up on 13 and simply kept using 12, cuz up to it works fine.

Dave 10-26-2012 06:59 AM

Quote:

Originally Posted by dgtheone (Post 538913)
Though about upgrading to Win8 but then remembered my number one OS upgrade rule. Wait for the first service pack.

huh, you forgot the number one windows rule. ALWAYS skip one version. 3.11 good, 95 bad, 98 good, me bad, xp good, vista bad, seven good, 8 bad.

that being said, do a favor to yourself and get seven back lol

retry32 10-26-2012 12:14 PM

Quote:

Originally Posted by Dave (Post 583847)
huh, you forgot the number one windows rule. ALWAYS skip one version. 3.11 good, 95 bad, 98 good, me bad, xp good, vista bad, seven good, 8 bad.

that being said, do a favor to yourself and get seven back lol

The ARM version of 8 is gonna be pretty badassy anyway

juggalord 10-26-2012 08:12 PM

Works for me just fine. Here's my story.

1. Clean Win8 Pro x64 install.
2. UAC off
3. KG run as admin
4. All I use is Maya, not the ECS.
5. Used the xf-adsk2013_x64.exe (not the ECS one, for obvious reasons)

No hanging. No lag. Business as usual. Maybe the problem is the ECS kg because the standalone products one works just fine.

Shaitan 10-26-2012 10:24 PM

Here's a really good news.
It couldn't make xforce keygen to work on Windows 8 but after I upgraded Windows 7, every software installed in it was working perfectly.

So basically all you have to do is install any Autodesk soft you want on Windows 7 and upgrade it to 8

Kinda boring but its better than nothing

SolidState 10-27-2012 11:03 AM

Quote:

Originally Posted by juggalord (Post 584147)
Works for me just fine. Here's my story.

1. Clean Win8 Pro x64 install.
2. UAC off
3. KG run as admin
4. All I use is Maya, not the ECS.
5. Used the xf-adsk2013_x64.exe (not the ECS one, for obvious reasons)

No hanging. No lag. Business as usual. Maybe the problem is the ECS kg because the standalone products one works just fine.

Did Maya flashes the viewport in white when you switch from perspective view to quad view and vice versa?

juggalord 10-27-2012 04:14 PM

Quote:

Originally Posted by SolidState (Post 584475)
Did Maya flashes the viewport in white when you switch from perspective view to quad view and vice versa?

Yeah, but very briefly - almost like a very minor draw lag. It doesn't happen any other time. Just when SPCing from single view to quad. I think that it was happening before too, but just less so. Probably a driver issue that'll be worked out soon. Again, it's a very minor annoyance. I'd have to be swapping views every other second for it to be seizure inducing or anything. :D

ochumo 10-27-2012 05:50 PM

Quote:

Originally Posted by juggalord (Post 584147)
Works for me just fine. Here's my story.

1. Clean Win8 Pro x64 install.
2. UAC off
3. KG run as admin
4. All I use is Maya, not the ECS.
5. Used the xf-adsk2013_x64.exe (not the ECS one, for obvious reasons)

No hanging. No lag. Business as usual. Maybe the problem is the ECS kg because the standalone products one works just fine.

it doesn´t work for me.... the same problem, it doesn´t open amd lag effects

---------- Post added at 05:50 PM ---------- Previous post was at 05:44 PM ----------

Quote:

Originally Posted by juggalord (Post 584147)
Works for me just fine. Here's my story.

1. Clean Win8 Pro x64 install.
2. UAC off
3. KG run as admin
4. All I use is Maya, not the ECS.
5. Used the xf-adsk2013_x64.exe (not the ECS one, for obvious reasons)

No hanging. No lag. Business as usual. Maybe the problem is the ECS kg because the standalone products one works just fine.

it doesn´t work for me, the same problems , it doesn´t work, lag...

Shaitan 10-27-2012 07:13 PM

oh crap... I tried what juggalord after a Windows 8 clean install and the same problem happened, except that the system did not hung

juggalord 10-27-2012 07:56 PM

@Shaitan: Just telling you what worked for me. Obviously, different people are having different experiences. It works fine with some people, but not for others. The only things "different" I did after the clean install were:

1. Install my Wacom driver & disabled pen flicks and "press & hold"
2. Disable few services either annoy me or speed up the system: AMD External Events, Diagnostic Policy/Service/System, HomeGroup Listener/Provider, Program Compatibility Assistant, Application Experience, & Security Center
3. Turned off hibernation in the control panel and with powercfg

Really, that's all I did after the clean install and before dropping Maya back on. I'm sure that these tweaks aren't for everybody, but I can say for sure that they at least didn't prevent me from getting Maya back.

The only program I had trouble getting into Win8 was xNormal. I got that in partly through safe mode and partly through manual installation of the OpenRL.


@SolidState: I looked into the "white flash" problem. Here's what I found.

1. This problem is not new. It existed even before Maya 2011. It's a pretty old issue
2. Some people fix it by turning off Aero. That's not an option in Win8 though.
3. Some people blame Wacom's drivers for it, but disabling them or uninstalling them didn't work for me.
4. Some people blame it on QuickTime, as that's what's driving the GUI iirc. Possible. My QuickTime standalone is a bit laggier here than in Win7. No way to tell until Apple optimizes QT for Win8.

My theory? Something to do with a display overlay or buffer. Here's why. I found this workaround on CG Talk...

Quote:

Note that if you cycle through the viewport presets on the left side of the Maya window by clicking on all of them, top to bottom, you eliminate the white flashing for your session. You need to do this every time you start up Maya.
In reality, this doesn't fix the problem so much as it masks it. If I'm right, that buffered video page is filled with white by default. When you cycle through all of the viewport presets, you're filling that buffer with the dark gray from you outliner, node editor, & so on. So, technically, you're not really getting rid of the flash. You're just exchanging the white for a much darker color. It's a slightly tedious workaround, but preferable to the white flash. Personally, seeing as how long this problem's been around, I think that's an AD side problem. Only they can fix it.


BTW: I don't think that a faster PC will minimize the problem. I'm on a 6-core i7 with 24GB RAM and a 1.5GB ATI card. Everything else runs smooth as silk.

SolidState 10-27-2012 11:43 PM

Quote:

Originally Posted by juggalord (Post 584598)
Yeah, but very briefly - almost like a very minor draw lag. It doesn't happen any other time. Just when SPCing from single view to quad. I think that it was happening before too, but just less so. Probably a driver issue that'll be worked out soon. Again, it's a very minor annoyance. I'd have to be swapping views every other second for it to be seizure inducing or anything. :D

I having this problem on Windows 7 (not only Maya, XSI and Max have problems with Aero, in my machine, but I think it's a common problem) and I remember that in Windows 8 you can't disable Aero or Aero Lite as they call it.

Also Alias Maya 7.0 is affected by the Aero glitch.

Only Basic or Classic mode solve this, but they add other annoying things, like no Aero Peek, some window redraw bugs and it looks like shit.

Edit.


Quote:

Originally Posted by juggalord
@SolidState: I looked into the "white flash" problem. Here's what I found.

1. This problem is not new. It existed even before Maya 2011. It's a pretty old issue
2. Some people fix it by turning off Aero. That's not an option in Win8 though.
3. Some people blame Wacom's drivers for it, but disabling them or uninstalling them didn't work for me.
4. Some people blame it on QuickTime, as that's what's driving the GUI iirc. Possible. My QuickTime standalone is a bit laggier here than in Win7. No way to tell until Apple optimizes QT for Win8.

My theory? Something to do with a display overlay or buffer. Here's why. I found this workaround on CG Talk...

Quote:

Note that if you cycle through the viewport presets on the left side of the Maya window by clicking on all of them, top to bottom, you eliminate the white flashing for your session. You need to do this every time you start up Maya.
In reality, this doesn't fix the problem so much as it masks it. If I'm right, that buffered video page is filled with white by default. When you cycle through all of the viewport presets, you're filling that buffer with the dark gray from you outliner, node editor, & so on. So, technically, you're not really getting rid of the flash. You're just exchanging the white for a much darker color. It's a slightly tedious workaround, but preferable to the white flash. Personally, seeing as how long this problem's been around, I think that's an AD side problem. Only they can fix it.
BTW: I don't think that a faster PC will minimize the problem. I'm on a 6-core i7 with 24GB RAM and a 1.5GB ATI card. Everything else runs smooth as silk.


Don't know, because I've installed Quick Time recently just to see if it's lack caused the problem, and the problem persists, and as I wrote up, this was present prior the Autodesk purchase and the UI changes.

It looks like Autodesk doesn't really tests the software for the system they are supposed to run, because the white flash can't be unseen.

I'll wait till my current system goes crazy before formatting again and install Windows 8.

Thanks for the reply.

PlatoS 11-06-2012 10:40 PM

Everything working absolutely fine here, Max, AutoCad, Revit, Mudbox all x64 2013.

Windows 8 upgrade but just kept my settings and files. Ran everything as admin as per usual.

Installed parts of CS6 Master Collection and MS Office but very little else before installing the above.

Really don't think I did anything crazy, just seemed to work.

aloeh 11-07-2012 12:15 PM

Quote:

Originally Posted by PlatoS (Post 590348)
Everything working absolutely fine here, Max, AutoCad, Revit, Mudbox all x64 2013.

Windows 8 upgrade but just kept my settings and files. Ran everything as admin as per usual.

Installed parts of CS6 Master Collection and MS Office but very little else before installing the above.

Really don't think I did anything crazy, just seemed to work.

In my first win8 install all autodesk products worked fine.

But all other win8 install's didnt work.

I really need autocad, i even installed projecad but i refuse myself to use.

Sry for my bad english.

SoniKalien 11-07-2012 08:13 PM

The Universal keygen worked fine for me - the one specifically for Max 2013 didn't. All under hacktivated win 8 x64 :)

aloeh 11-21-2012 12:20 PM

Universal keygen not working for me.

2012 keygen work perfectly.


Sry for my bad english.

prezadent 11-21-2012 05:22 PM

For the people that have to have the latest and 'greatest', you just got punked. Let me be the first to say...
http://www.littlestuffedbull.com/ima...vengers262.jpg

Shaitan 11-21-2012 05:41 PM

Quote:

Originally Posted by prezadent (Post 598807)
For the people that have to have the latest and 'greatest', you just got punked. Let me be the first to say...
[image]


and by 'latest and greatest' that you mean...?

prezadent 11-21-2012 06:38 PM

Quote:

Originally Posted by Shaitan (Post 598814)
and by 'latest and greatest' that you mean...?

Code:

http://news.cnet.com/8301-1001_3-57551670-92/design-guru-nielsen-windows-8-ui-smothers-usability/

Shaitan 11-22-2012 04:10 AM

Thats a pretty partial 'new'. Yes, Windows 8 is a totally different operating system if - and only if - you keep yourself with the Windows 8 softwares. Want to play with several windows? Ok, press the keyboard windows button and go. Theres the desktop you're used to work with.

th4d 11-26-2012 06:20 AM

so no fixes/newer keygen yet. =(

salatteller 11-28-2012 03:29 PM

hmmm, just installed Win8 Pro, activated it. Shut down Win Defender and Firewall, UAC lowest setting. Keygen run as Admin after starting Softimage and getting to the activation. Mempatch and keygen worked perfectly.

Can Windows Defender be a problem?? Or the firewall?

nismo08861 12-15-2012 08:55 AM

Here's the fix!!!
 
Ok first google "xf-adsk2013_x64.exe". download it. disable UAC, and SmartScreen. Right click and run as administrator. Here's the part where you're guna hit yourself on the head!!! Ready??? All you have to do is wait! It will take about 30-45 min but it will open and then just patch it. I'm running Windows 8 Pro with Media Center. Hope this helps everyone!! :D

th4d 12-15-2012 11:00 PM

Quote:

Originally Posted by nismo08861 (Post 614552)
Ok first google "xf-adsk2013_x64.exe". download it. disable UAC, and SmartScreen. Right click and run as administrator. Here's the part where you're guna hit yourself on the head!!! Ready??? All you have to do is wait! It will take about 30-45 min but it will open and then just patch it. I'm running Windows 8 Pro with Media Center. Hope this helps everyone!! :D

i disabled all that, disabled eve the DEP service.

30-45min? why the hell did u wait that long?

damn, im not sure if youre trolling me, but i have no choice other than test that. the hard drive going 100% for that longe worries me a lot though, feels like its gonna damage something or at least degrade my ssd.

well ill post if it works, thanks

---------- Post added at 11:00 PM ---------- Previous post was at 06:33 PM ----------

Quote:

Originally Posted by nismo08861 (Post 614552)
Ok first google "xf-adsk2013_x64.exe". download it. disable UAC, and SmartScreen. Right click and run as administrator. Here's the part where you're guna hit yourself on the head!!! Ready??? All you have to do is wait! It will take about 30-45 min but it will open and then just patch it. I'm running Windows 8 Pro with Media Center. Hope this helps everyone!! :D

70min, no deal.

no windows defender, no uac, no dep, no firewall, even changed windows policy to run everything as administrator. one thing though, the only way i was able to run the keygen for it to open, was to run it inside a rar file, but not as administrator, but of course that doesnt work. the second i run as administrator same thing as walways happens, it doesnt open.

i noticed that even when i run the file o my desktop in c:, the process was using my d: harddrive at 100%, so i changed letters in order for the iso on the virtual cd rom could be the d: being used. also didnt work.

i give up, xforce guys ara amazing in what they do, but i guess there wont be a proper version for 2013 and windows 8 pro, ill just stick with a prior version.

dac2012 12-18-2012 02:30 AM

Chipset update fixed it
 
I had the same problem with the keygen freezing up, but ASUS just released an AMD chipset update for my motherboard (M5A99X) and now the keygen works fine. The keygen worked on my older motherboard (M4A77TD) without any chipset update; both on Win 8. Strangely, the UAC had to be enabled for it to work on my older board.

Shaitan 12-18-2012 02:39 AM

Just got the lastest ASUS chipset for my Formula V mb. Tomorow I'll post the results

th4d 12-18-2012 03:31 AM

Quote:

Originally Posted by dac2012 (Post 616545)
I had the same problem with the keygen freezing up, but ASUS just released an AMD chipset update for my motherboard (M5A99X) and now the keygen works fine. The keygen worked on my older motherboard (M4A77TD) without any chipset update; both on Win 8. Strangely, the UAC had to be enabled for it to work on my older board.

isnt it the same as the latest chipset driver in the amd website? cuz if so i always update to the latest beta, and ive gone through some of those in the last few months that i kept trying. i dont believe branded chipset drivers have any difference, technically the chipsets are the same.

Shaitan 12-18-2012 04:46 AM

Quote:

Originally Posted by th4d (Post 616580)
isnt it the same as the latest chipset driver in the amd website? cuz if so i always update to the latest beta, and ive gone through some of those in the last few months that i kept trying. i dont believe branded chipset drivers have any difference, technically the chipsets are the same.

The chipset is the same but not the way the hardware 'talks' to it and even so each MB has its own 'chipset pack'. Although its weird to see a soft blocked but by a chipset, which - theorically - cant talk to each other.

dac2012 12-18-2012 07:21 AM

I had forgot to check the AMD site. I tested the 12-10 chipset there and it also allows the keygen to work on mine.

Shaitan 12-18-2012 01:27 PM

Its finally working perfectly now! :D

th4d 12-18-2012 06:09 PM

Quote:

Originally Posted by Shaitan (Post 616612)
The chipset is the same but not the way the hardware 'talks' to it and even so each MB has its own 'chipset pack'. Although its weird to see a soft blocked but by a chipset, which - theorically - cant talk to each other.

just rechecked the gigabyte website, got the drivers and tried to install. showed same catalyst install thats on amd website, same especific drivers for each component, didnt update or change anything. and i dont believe chipset drivers arent the same, to me they are inf act exactly the same requiring the same drivers. same thing goes for videocard drivers. u guys were just probably missing the latest drivers.

i could be wrong but tried to find something on this and found nothing to support it. usually the different stuff are onboard video, ethernet, sound. not the chipset.

u guys did it, got latest ahci drivers from amd website, and it worked! thank you you beautifull geniuses, i wouldve never thought of that

GabiLins 12-19-2012 08:50 PM

Quote:

Originally Posted by nismo08861 (Post 614552)
Ok first google "xf-adsk2013_x64.exe". download it. disable UAC, and SmartScreen. Right click and run as administrator. Here's the part where you're guna hit yourself on the head!!! Ready??? All you have to do is wait! It will take about 30-45 min but it will open and then just patch it. I'm running Windows 8 Pro with Media Center. Hope this helps everyone!! :D



congratulations really works thank you:)

Dancem 12-26-2012 08:10 PM

After day of experiments and tests I had found, that xforce keygen don't work after installing "Intel Rapid Storage Technology" driver in windows 8. It happens not always - I have x4 PCs with same config and have no any problems.

HERE ARE NEW & EASY SOLUTION!
Problem is solving in BIOS/UEFI. I had found it, because not only keygen didn't work, but some other programs too. For some reason in Windows 8 there is problem with SATA power using options.

So you need simply find and turn OFF (DISABLED) in BIOS (UEFI) option like "SATA Aggressive Power Management" or it can also have name "ALPM" or "ASP" (or like "hot-swap" feature :) )



My old tries:
Quote:

On a problem PC I have RAID5 storage, so it need raid driver to work. Xforce keygen works fine until driver installing... and after(!) driver deleting/replacing too.

So to use xforce keygen try to:
- uninstall iRST, delete/replace intel storage controller drivers with any standard driver;
- run keygen;
- install iRST again and update drivers.

Hope it will help.

---------- Post added at 09:10 PM ---------- Previous post was at 08:45 PM ----------

It works, just done with test.

So to use xforce keygen need to:
- delete/replace intel storage controller drivers with any standard driver;
- run keygen;
- update drivers to correct one.

There no need to delete iRST :)

In my case:
- I replaced "Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller" with standard "RAID-controller Intel(R) ICH8R/ICH9R/ICH10R/DO SATA"
- had restart PC, and check driver version. My RAID not working after that, as should;
- successfully run keygen
- change driver back, restart.
(keygen not working again, as supposed, and RAID is working fine (again))

zbod 12-29-2012 03:32 AM

Quote:

HERE ARE NEW & EASY SOLUTION!
Problem is solving in BIOS/UEFI. I had found it, because not only keygen didn't work, but some other programs too. For some reason in Windows 8 there is problem with SATA power using options.

So you need simply find and turn OFF (DISABLED) in BIOS (UEFI) option like "SATA Aggressive Power Management" or it can also have name "ALPM" or "ASP
Thank you! this finally worked after i tried everything else throughout the last month. On a side note for you fellow ASUS motherboard owners. The equivalent of disabling ALPM is enabling the hot-swap feature for your SATA port in bios. After enabling the hot-swap feature for my main SSD the xforce app finally loaded without freezing. Thank you again!

Spadger 12-30-2012 12:30 PM

I'm having no luck with AutoCAD LT 2013 using the xf-autocad-kg x64 keygen. Just keep getting "Activation Error" (0015.111). I've tried turning off firewall and Smartscreen and reducing UAC without success.
I have Windows 8 and using :-
Serial Number: 111-11111111
Product Key: 057E1
Request code: QY1D AH8G RDRG FZR9 E2PC 6UZK WGLS 3WGZ


Any suggestions what else I can try please.

mhdz 01-01-2013 08:59 PM

Quote:

Originally Posted by nismo08861 (Post 614552)
Ok first google "xf-adsk2013_x64.exe". download it. disable UAC, and SmartScreen. Right click and run as administrator. Here's the part where you're guna hit yourself on the head!!! Ready??? All you have to do is wait! It will take about 30-45 min but it will open and then just patch it. I'm running Windows 8 Pro with Media Center. Hope this helps everyone!! :D

It worked for me after 40 minutes
I don't know how to appreciate this
I really needed this
Just THANKS
__________________
Just be patient and you can reach


All times are GMT +1. The time now is 10:37 PM.

Powered by PHPbb