[omnious]

We all know that you won't make anything with it - you are just collecting cool shit, but to stop the whining here it is:

/usr/discreet/smoke_2011.SP1/bin/smoke_MACOSX_10.6_x86_64.app/Contents/MacOS/smoke

0x119ba31 - 0xb8
0x119ba32 - 0x01
0x119ba33 - 0x00
0x119ba34 - 0x00
0x119ba35 - 0x00
0x119ba36 - 0xc3
0x119d0c1 - 0xc3
0x3493c0a - 0xb8
0x3493c0b - 0x01
0x3493c0c - 0x00
0x3493c0d - 0x00
0x3493c0e - 0x00
0x3493c0f - 0xc3
0x3493fb6 - 0xb8
0x3493fb7 - 0x01
0x3493fb8 - 0x00
0x3493fb9 - 0x00
0x3493fba - 0x00
0x3493fbb - 0xc3
0x3495560 - 0xb8
0x3495561 - 0x01
0x3495562 - 0x00
0x3495563 - 0x00
0x3495564 - 0x00
0x3495565 - 0xc3
0x34debbe - 0xb8
0x34debbf - 0x01
0x34debc0 - 0x00
0x34debc1 - 0x00
0x34debc2 - 0x00
0x34debc3 - 0xc3

Click Thanks below.

[traika]

thanks bro thanks,oohhhh no i'll make fire wuth it mouahhhhhhhhhhhhhhhhhhh

[flyinmycoffee]

ehmm... excuse my ignorance but how do I use this?

[omnious]

As far as I understand it, one would use a hex editor and go to those offsets listed and replace the byte that's there with the one listed.

[Cynddl]

So cool, thanks !
I'm testing it !

[Cynddl]

For those who need the setup, i found 2 links :

Links:

Links:

Enjoy !

[lavatoryloo]

did anyone get it working?
not me :-(

[omnious]

lavatoryloo,

You need SP1 and a hex editor such as 0xED. Find the offsets in the file and put those bytes there.

Maybe your computer does not meet the spec?

[creole]

Does this work with SP3?

[creole]

Ok, I modded SP1 as above but I get the following error:

Aug 14 14:08:09 : Effective User ID not 0 (root) !
Aug 14 14:08:09 : Aborting....
Aug 14 14:08:10 : Uninitialising thread manager.
Aug 14 14:08:10 :

Anyone else?

[creole]

K, I figured the User ID thing out - I was pulling out "smoke" from the .app package. Don't do that!

Now I get this error:

---------------------------------------------------------------------------

Internal Error: Caught a signal before task management was initialized.
Exiting
SIGSEGV - Segmentation Fault
Signal was generated internally:
address not mapped to object at address 0x00000000
Uninitialising thread manager.

Anyone else got this working?

[mmikemott]

Nice!!!

Smoke crack for mac smacked


Installed!!!! Won't be truly verified until I conform a FCP project and output it to D5.


can't wait for all the sweet plug ins to start coming....

[creole]

I don't think it works. Unless I'm missing something. I used 0xed and modified these offsets with the values specified.

Can someone help??

[killajoe]

hmmm... I get an error, double checked my inputs and tried 2x's still get the same error.. u think maybe we need the same specs and your machine for it to work? or u just got lucky? so far this is a no go...

Application exited abnormally. (quit or show detail)

in detail win.. I just get today's date and time..

shucks

[Cynddl]

omnious, can you upload you patched file pls ?

[lavatoryloo]

This from MSJ - user 31c040c3 posted so thanks to him

Installed and verified as working. Don't bother installing if you don't meet the screen resolution requirements though... the app is fullscreen and the buttons to create projects and users stick off the sides of the screen making it unusable. Anyway full instructions below:

Smoke 2011 SP3 [K]:

Links:

1. Download and install Smoke 2011 SP3
2. Download and unzip the [K]
3. Replace /usr/discreet/smoke_2011.SP3/bin/smoke_MACOSX_10.6_x86_64.app/Contents/MacOS/smoke with the downloaded version
4. Run the following commands in terminal and enter your password as needed:
sudo chown root:wheel /usr/discreet/smoke_2011.SP3/bin/smoke_MACOSX_10.6_x86_64.app/Contents/MacOS/smoke
sudo chmod u+s /usr/discreet/smoke_2011.SP3/bin/smoke_MACOSX_10.6_x86_64.app/Contents/MacOS/smoke
5. Enjoy Smoke

[Guru74]

Holy smokes, it works! It seems to be the real thing, finally.

Running on my 15" MBP on an external 24" screen (as mentioned essential buttons are outside the 15" area, you simply can't get past the startup screen... Of course there is no way to work with such a huge lack of performance, but it's great to learn and practice the interface.

Thank you for posting!

*smokes*

[flyinmycoffee]

Indeed it works beautifully (at least so far) on my mac pro. Thanx everybody!!

[Guru74]

Oh man, it's been 7 years since I worked the last time with smoke* and now it took me 2 hours until I figured out how to import RED RAW footage via WiretapCentral and Backburner :-/ The good thing is, it's not something everyone can/will just learn a little by clicking around, even if the crack is easy and the app runs remarkably clean and stable.

Wot fun. Now my head hurts...

[omnious]

As lavatoryloo already wrote, I posted the fix for SP3 version on MSJ and user 31c040c3 there made instructions and a [K] from it, so use that.

Of course, you can't run sm0ke on a dinky MBP and expect to get far with it - you need a big ass computer for it.

[creole]

This is so rad.

Omnius- what is MSJ? Just curious.

[creole]

How do you get around the wiretap gateway unlicensed issue?

[sivartc]

Where do I get Smoke OSX sp3. Got the k.

[flyinmycoffee]

I don't know if it's a setup thing but when i create a new project i get a "CLIP MGT format failed" and a "SF cannot create lock" message and the program crashes. @ the system checker I get an incompatibility with OS10.6.4 (10.6.3 compatible) and also an expired license error. Any suggestions?

[mmikemott]

Links:

go to autodesk and downlaod TRIAL FOR MAC USERS sp3 dmg file

[creole]

Hmmm. Not having a license affects Quicktime support (prores and DNX). Also, no RED support.

Any ideas?

But I'm not complaining! Thank you for this whoever figured it out!!!!

[dudek]

SP3 is here also - a direct ftp download...

Links:

[creole]

Links:

Mike, not to burst your bubble, but unfortunately it's almost un-useable. It crashes constantly. The trial version doesn't on the same machine. Plus no r3d or proper quicktime support.

Sigh..... we'll just have to wait for a keygen.

[Guru74]

Yes, I have a working trial license. Ok, I now restored the binary back to original and when starting smoke* it of course tells me that it's a trial. Then I removed the license file so that smoke* sends me right to the license wizard, has to be pretty much the state of a clean install. Replaced back the binary with the cracked one and smoke* works just fine. Also Backburner works, but you're right, Wiretap Gateway is unlicensed.

But besides that, it seems to me as if everything else runs just fine. Yeah, system checker says otherwise, but that's just the missing oomph :-D

It's definitely a step further. I just had some RED footage ;-) If it won't work in a month, so what. As I mentioned I just need a version to (re-)learn and practice. Sooner or later the Wiretap licensing will be fixed as well. I guess this step is rather smaller then the one before.

[creole]

XML and EDL import don't work either.

[mmikemott]

Links:

It's def buggy.....

so far.....imported some QT movie files and will try to do some shit to it and see if I can get it to output a digital file....
I do not have too much hope that I can output it to D5 at work.

But awesome progress.....towards fully functional version

[sivartc]

Links:

MMIKEMOTT! Man I am truly happy to see your pain end about this smoke thread. I would just die everytime someone posted some nonsense leading you like a fish to bate everytime and then to hear the rant has been priceless!! LOL is it really over? I cant believe it!!!!!!!

[mmikemott]

Links:

Well....I gave up on restoring a smoke archivel BUT it is working right now with imported QT files....

Like I said before, will not know until I can output this at least as a digital file let alone to a D5 tape.

[Guru74]

Links:

Yeah right. Even sooner. The [k] just got released

- Replace /usr/discreet/wiretapgateway/wiretapgateway

by this:

Links:

- Run the following commands in terminal and enter your password as needed:

Links:

- Restart computer to relaunch wiretap gateway
- Enjoy
- Smoke

[mmikemott]

Anyone get the 2011 training archive to install properly using the install script from autodesk?

[theseen1]

Links:

This is two commands? I will need to hit enter after running each? Is wire tap needed to use?

[theseen1]

Where to I find pack contents? I see nothing but an alias!

[Guru74]

Ok, for those who were not busy the whole day fiddling around with smack* here the complete instructions:


1. Download and install Smoke 2011 SP3 here:

Links:

2. Download and unzip both [K] files

Smoke 2011 SP3 [K]:

Links:

Wiretap Gateway [K]:

Links:

3. Replace
/usr/discreet/smoke_2011.SP3/bin/smoke_MACOSX_10.6_x86_64.app/Contents/MacOS/smoke
and
/usr/discreet/wiretapgateway/wiretapgateway
with the downloaded version


4. Run the following (four) commands in terminal and enter your password as needed:

Links:

5. Restart computer to relaunch wiretap gateway

6. Enjoy

7. Smoke

[theseen1]

Smoke crashed on start up. And my cpu is way to high. Running the uninstaller.

[flyinmycoffee]

This seems to be working great. Thanks!

[paule0512at]

i´v have problems with my wacom.
if i click, i have a offset between my curserposition and the position of the click.
this happens only with the patched smoke.
with the mouse, there is no problem.
are there any ideas or same problems ?

[flyinmycoffee]

My wacom (intuos 3, driver version 6.1.5-2) works fine.

(Man this is one strange piece of software..)

[yslumiere]

Hi all,

Smoke is crashing when I press X key which is a hot key for moving between transitions.
I guess it is unstable by Cracking. Fix me if I am wrong. Just press X on Editlibrary or Timeline.
So bad !!!

[creole]

Yes, "X" crashes the system.

It's so weird how changing a few bytes in the code causes something random like this.

[flyinmycoffee]

Indeed it does. x crashes the system. How strange..

[sivartc]

Links:

Man I cant get my volume targeted. Wiretaps done everything looks and works great. All commands run. 8 core mac. Just cant get to my media. Any ideas. Nevermind. LOL my screen was cut ff at the top not allowing me to get to my directory. 1st time using smoke. Im gonna dig in deep. I love it

[mmikemott]

SIV....

Did you get the 2011 smoke essential tutorials to restore its archive properly?

When I run installer, it says cannot find media storage. Strange since I am able to import files from my media storage.

[Lapinos]

Hi, all my friends.....;

Autodesk Smoke 2011 Mac OSX With RS ;

Links:

Links:

Links:

Links:

Links:

Links:

Links:

Links:

Links:

Links:

Happy ?

Don't forget clik Thank

[theseen1]

Is thier a serial?

[Lapinos]

see Guru74